Ovule

The name of the pictureThe name of the pictureThe name of the pictureClash Royale CLAN TAG#URR8PPP





Location of ovules inside a Helleborus foetidus flower


In seed plants, the ovule is the structure that gives rise to and contains the female reproductive cells. It consists of three parts: The integument(s), forming its outer layer(s), the nucellus (or remnant of the megasporangium), and the female gametophyte (formed from a haploid megaspore) in its center. The female gametophyte — specifically termed a megagametophyte— is also called the embryo sac in angiosperms. The megagametophyte produces an egg cell (or several in some groups) for the purpose of fertilization.




Contents





  • 1 Location within the plant


  • 2 Ovule parts and development

    • 2.1 Integuments, micropyle and chalaza


    • 2.2 Nucellus, megaspore and perisperm


    • 2.3 Megagametophyte


    • 2.4 Zygote, embryo and endosperm


    • 2.5 Types of gametophytes



  • 3 See also


  • 4 References


  • 5 Bibliography


  • 6 External links




Location within the plant


In flowering plants, the ovule is located inside the portion of the flower called the gynoecium. The ovary of the gynoecium produces one or more ovules and ultimately becomes the fruit wall. Ovules are attached to the placenta in the ovary through a stalk-like structure known as a funiculus (plural, funiculi). Different patterns of ovule attachment, or placentation, can be found among plant species, these include:[1]



  • Apical placentation: The placenta is at the apex (top) of the ovary. Simple or compound ovary.


  • Axile placentation: The ovary is divided into radial segments, with placentas in separate locules. Ventral sutures of carpels meet at the centre of the ovary. Placentae are along fused margins of carpels. Two or more carpels. (e.g. Hibiscus, Citrus, Solanum)


  • Basal placentation: The placenta is at the base (bottom) of the ovary on a protrusion of the thalamus (receptacle). Simple or compound carpel, unilocular ovary. (e.g. Sonchus, Helianthus, Compositae)


  • Free-central placentation: Derived from axile as partitions are absorbed, leaving ovules at the central axis. Compound unilocular ovary. (e.g. Stellaria, Dianthus)


  • Marginal placentation: Simplest type. There is only one elongated placenta on one side of the ovary, as ovules are attached at the fusion line of the carpel's margins . This is conspicuous in legumes. Simple carpel, unilocular ovary. (e.g. Pisum)


  • Parietal placentation: Placentae on inner ovary wall within a non-sectioned ovary, corresponding to fused carpel margins. Two or more carpels, unilocular ovary. (e.g. Brassica)


  • Superficial: Similar to axile, but placentae are on inner surfaces of multilocular ovary (e.g. Nymphaea)



Ovule structure (anatropous) 1: nucleus 2: chalaza 3: funiculus 4: raphe


Ovule orientation may be anatropous, such that when inverted the micropyle faces the placenta (this is the most common ovule orientation in flowering plants), amphitropous, campylotropous, or orthotropous.


In gymnosperms such as conifers, ovules are borne on the surface of an ovuliferous (ovule-bearing) scale, usually within an ovulate cone (also called megastrobilus). In some extinct plants (e.g. Pteridosperms), megasporangia and perhaps ovules were borne on the surface of leaves. In other extinct taxa, a cupule (a modified leaf or part of a leaf) surrounds the ovule (e.g. Caytonia or Glossopteris).



Ovule parts and development




Plant ovules: Gymnosperm ovule on left, angiosperm ovule (inside ovary) on right




Models of different ovules, Botanical Museum Greifswald


The ovule appears to be a megasporangium with integuments surrounding it. Ovules are initially composed of diploid maternal tissue, which includes a megasporocyte (a cell that will undergo meiosis to produce megaspores). Megaspores remain inside the ovule and divide by mitosis to produce the haploid female gametophyte or megagametophyte, which also remains inside the ovule. The remnants of the megasporangium tissue (the nucellus) surround the megagametophyte. Megagametophytes produce archegonia (lost in some groups such as flowering plants), which produce egg cells. After fertilization, the ovule contains a diploid zygote and then, after cell division begins, an embryo of the next sporophyte generation. In flowering plants, a second sperm nucleus fuses with other nuclei in the megagametophyte forming a typically polyploid (often triploid) endosperm tissue, which serves as nourishment for the young sporophyte.



Integuments, micropyle and chalaza


An integument is a protective cell layer surrounding the ovule. Gymnosperms typically have one integument (unitegmic) while angiosperms typically have two (bitegmic). The evolutionary origin of the inner integument (which is integral to the formation of ovules from megasporangia) has been proposed to be by enclosure of a megasporangium by sterile branches (telomes).[2]Elkinsia, a preovulate taxon, has a lobed structure fused to the lower third of the megasporangium, with the lobes extending upwards in a ring around the megasporangium. This might, through fusion between lobes and between the structure and the megasporangium, have produced an integument.[3]


The origin of the second or outer integument has been an area of active contention for some time. The cupules of some extinct taxa have been suggested as the origin of the outer integument. A few angiosperms produce vascular tissue in the outer integument, the orientation of which suggests that the outer surface is morphologically abaxial. This suggests that cupules of the kind produced by the Caytoniales or Glossopteridales may have evolved into the outer integument of angiosperms.[4]


The integuments develop into the seed coat when the ovule matures after fertilization.


The integuments do not enclose the nucellus completely but retain an opening at the apex referred to as the micropyle. The micropyle opening allows the pollen (a male gametophyte) to enter the ovule for fertilization. In gymnosperms (e.g., conifers), the pollen is drawn into the ovule on a drop of fluid that exudes out of the micropyle, the so-called pollination drop mechanism.[3] Subsequently, the micropyle closes. In angiosperms, only a pollen tube enters the micropyle. During germination, the seedling's radicle emerges through the micropyle.


Located opposite from the micropyle is the chalaza where the nucellus is joined to the integuments. Nutrients from the plant travel through the phloem of the vascular system to the funiculus and outer integument and from there apoplastically and symplastically through the chalaza to the nucellus inside the ovule. In chalazogamous plants, the pollen tubes enter the ovule through the chalaza instead of the micropyle opening.



Nucellus, megaspore and perisperm


The nucellus (plural: nucelli) is part of the inner structure of the ovule, forming a layer of diploid (sporophytic) cells immediately inside the integuments. It is structurally and functionally equivalent to the megasporangium. In immature ovules, the nucellus contains a megasporocyte (megaspore mother cell), which undergoes sporogenesis via meiosis. In the megasporocyte of Arabidopsis thaliana, meiosis depends on the expression of genes that facilitate DNA repair and homologous recombination.[5]


In gymnosperms, three of the four haploid spores produced in meiosis typically degenerate, leaving one surviving megaspore inside the nucellus. Among angiosperms, however, a wide range of variation exists in what happens next. The number (and position) of surviving megaspores, the total number of cell divisions, whether nuclear fusions occur, and the final number, position and ploidy of the cells or nuclei all vary. A common pattern of embryo sac development (the Polygonum type maturation pattern) includes a single functional megaspore followed by three rounds of mitosis. In some cases, however, two megaspores survive (for example, in Allium and Endymion). In some cases all four megaspores survive, for example in the Fritillaria type of development (illustrated by Lilium in the figure) there is no separation of the megaspores following meiosis, then the nuclei fuse to form a triploid nucleus and a haploid nucleus. The subsequent arrangement of cells is similar to the Polygonum pattern, but the ploidy of the nuclei is different.[6]


After fertilization, the nucellus may develop into the perisperm that feeds the embryo. In some plants, the diploid tissue of the nucellus can give rise to the embryo within the seed through a mechanism of asexual reproduction called nucellar embryony.



Megagametophyte




Megagametophyte formation of the genera Polygonum and Lilium. Triploid nuclei are shown as ellipses with three white dots. The first three columns show the meiosis of the megaspore, followed by 1-2 mitoses.




Ovule with megagametophyte: egg cell (yellow), synergids (orange), central cell with two polar nuclei (bright green), and antipodals (dark green)


The haploid megaspore inside the nucellus gives rise to the female gametophyte, called the megagametophyte.


In gymnosperms, the megagametophyte consists of around 2000 nuclei and forms archegonia, which produce egg cells for fertilization.


In flowering plants, the megagametophyte (also referred to as the embryo sac) is much smaller and typically consists of only seven cells and eight nuclei. This type of megagametophyte develops from the megaspore through three rounds of mitotic divisions. The cell closest to the micropyle opening of the integuments differentiates into the egg cell, with two synergid cells by its side that are involved in the production of signals that guide the pollen tube. Three antipodal cells form on the opposite (chalazal) end of the ovule and later degenerate. The large central cell of the embryo sac contains two polar nuclei.



Zygote, embryo and endosperm


The pollen tube releases two sperm nuclei into the ovule. In gymnosperms, fertilization occurs within the archegonia produced by the female gametophyte. While it is possible that several egg cells are present and fertilized, typically only one zygote will develop into a mature embryo as the resources within the seed are limited.[citation needed]


In flowering plants, one sperm nucleus fuses with the egg cell to produce a zygote, the other fuses with the two polar nuclei of the central cell to give rise to the polyploid (typically triploid) endosperm. This double fertilization is unique to flowering plants, although in some other groups the second sperm cell does fuse with another cell in the megagametophyte to produce a second embryo. The plant stores nutrients such as starch, proteins, and oils in the endosperm as a food source for the developing embryo and seedling, serving a similar function to the yolk of animal eggs. The endosperm is also called the albumen of the seed.[citation needed]


Embryos may be described by a number of terms including Linear (embryos have axile placentation and are longer than broad), or rudimentary (embryos are basal in which the embryo is tiny in relation to the endosperm).[7]



Types of gametophytes


Megagametophytes of flowering plants may be described according to the number of megaspores developing, as either monosporic, bisporic, or tetrasporic.[citation needed]



See also


  • Gynoecium

  • Ovum

  • Alternation of generations

  • Meiosis

  • Oogenesis

  • Placentation


References




  1. ^ Kotpal, Tyagi, Bendre, & Pande. Concepts of Biology XI. Rastogi Publications, 2nd ed. New Delhi 2007. ISBN 8171338968. Fig. 38 Types of placentation, page 2-127


  2. ^ Herr, J.M. Jr., 1995. The origin of the ovule. Am. J. Bot. 82(4):547-64


  3. ^ ab Stewart, W.N.; Rothwell, G.W. (1993). Paleobotany and the evolution of plants. Cambridge University Press. ISBN 0521382947. 


  4. ^ Frohlich and Chase, 2007. After a dozen years of progress, the origin of angiosperms is still a great mystery. Nature 450:1184-1189 (20 December 2007) | doi:10.1038/nature06393;


  5. ^ Seeliger K, Dukowic-Schulze S, Wurz-Wildersinn R, Pacher M, Puchta H (2012). "BRCA2 is a mediator of RAD51- and DMC1-facilitated homologous recombination in Arabidopsis thaliana". New Phytol. 193 (2): 364–75. doi:10.1111/j.1469-8137.2011.03947.x. PMID 22077663. 


  6. ^ Gifford, E.M.; Foster, A.S. (1989), Morphology and evolution of vascular plants, New York: W. H. Freeman and Company 


  7. ^ The Seed Biology Place:Structural seed types based on comparative internal morphology




Bibliography


.mw-parser-output .refbeginfont-size:90%;margin-bottom:0.5em.mw-parser-output .refbegin-hanging-indents>ullist-style-type:none;margin-left:0.mw-parser-output .refbegin-hanging-indents>ul>li,.mw-parser-output .refbegin-hanging-indents>dl>ddmargin-left:0;padding-left:3.2em;text-indent:-3.2em;list-style:none.mw-parser-output .refbegin-100font-size:100%

  • P.H. Raven, R.F. Evert, S.E. Eichhorn (2005): Biology of Plants, 7th Edition, W.H. Freeman and Company Publishers, New York, ISBN 0-7167-1007-2

  • Peter K. Endress.Angiosperm ovules: diversity, development, evolution. Ann Bot (2011) 107 (9): 1465-1489. doi: 10.1093/aob/mcr120



External links


  • Morfología de Plantas Vasculares (in Spanish)









Popular posts from this blog

用户:Ww71338ww/绘画

自由群

卑爾根